Is There Bacteria In Your Well Water?
Bacteria is present in nearly all freshwater sources. Whether you have a private well or spring, or municipal water, most of these contaminants are successfully eliminated and disinfected using chlorination, chloramines or UV treatment. So when should you be concerned?
A number of issues can arise that allow bacteria and viruses to infiltrate your water supply, including runoff, septic systems, animals and poor well/spring construction. If you recently bought a home with a well or spring, get it tested immediately if this wasn’t a requirement over the inspection period.
How To Detect Bacteria In Water
Turbidity is the apt descriptor of cloudy water with suspended solids. While the water itself is not harmful to humans, the suspended solids can act as an impediment to the disinfection process and provide an ideal environment for microbial growth.
The best way to tell if there is bacteria in your water is always to have it tested, although there are signs to recognize if you suspect you might have a problem with your water:
- Water begins leaving unusual or heavy staining around fixtures and drains, may be rust colored
- Water takes on an unpleasant (rotten eggs or moldy) smell
- Water is cloudy or discolored
- If your water shows any of these symptoms, stop drinking and using it immediately and call your local water authority.
Even if your water shows no outward signs of contamination, make it a habit to test your water at least once a year. If you use well water, test it biannually to ensure your supply is safe. You should also schedule a water test any time you do septic repairs or upgrades.
Treatment Options
While some common waterborne organisms can be treated by boiling water, like the parasites giardia and cryptosporidium, others are more difficult to eliminate from drinking water. In those cases, you’ll want to be sure you’re treating water with a reverse osmosis filtration system to effectively remove problematic bacteria.
If a test comes back positive, there are several treatment routes, whether you want treatment just at the kitchen sink or at the point where water enters the house.
The type of treatment you need can depend on a variety of factors. Another common form of disinfection technology is UV. Culligan’s UV Disinfection System within its whole home UV water purification solution can be added to your filter or softener as a disinfection stage. UV units are certified to published performance standards, so ask which standard and which organisms a given unit is rated for.
Sometimes, positive bacteria tests are a result of one-time contamination and may only require shock chlorination treatment. This requires a coliform bacteria test, followed by a period of retesting over a two- to three-month period. If this does not work, a more permanent solution is in order.
For private springs, shock chlorination rarely works, as water runs through the spring too quickly to contact the chlorine needed to eliminate the bacteria.
Common Types of Bacteria In Water
Total Coliform – Coliform are a naturally-occurring and usually benign bacteria very common in the environment. While not always an indication of a problem in your water, they can signal that other types of coliforms, like fecal coliforms, could be in the supply. Read more below.
Fecal Coliform – As its name might suggest, fecal coliform indicates water has been contaminated by human or animal waste, commonly as a result of heavy runoff near agricultural areas. A fecal coliform detection is the signal that the supply needs attention, and your water system or county health department will tell you what steps to take.
E.coli – Having made its share of headlines, E.coli may be the most recognizable bacteria in water. As a form of fecal coliform bacteria, E.coli gets into water the same way: agricultural runoff, septic system malfunction, or a breakdown in the well or water infrastructure. A positive E.coli result is treated as more urgent than a general coliform hit and carries notification requirements for public systems.
Legionella – Legionella is also a commonly occurring bacteria. It becomes problematic when it’s aerosolized — or airborne — as it would in a cooling tower or similar equipment. Like coliform contamination, legionella contamination typically occurs through breakdowns in water infrastructure and/or during storms, floods, or other periods of increased runoff.
Giardia & Cryptosporidium – Found all over the world, giardia and cryptosporidium are parasites closely associated with poor sanitation, waste-contaminated, or otherwise untreated water, and can be caused when runoff near agricultural areas exceeds the capacity of water infrastructure and treatment.
Solutions
Suggested Products
The Aquasential® Smart Reverse Osmosis Water Filter (RO)
- 7 stages of filtration and 12 filter options
- Certified for reduction of 58 contaminants
- 2-in-1 sediment and carbon filter screens out sediment and particles
- Can alert you and your dealer when service or filter replacements are needed
Aquasential™ Smart High Efficiency Whole House Water Filters
Reduce sediments in your water and contaminants that cause your water to appear, taste, and smell unpleasant. Your system can also lessen the taste and odor of chlorine, and prevent pipe damage and staining from low pH water. Additional customizations include:
- Culligan® Filtr-Cleer® Water Filters – Reduces Sediment Problems
- Culligan® Cullar® Water Filters – Reduces Taste and Odor Problems
- Culligan® Cullneu Water Filters – Reduces Acid Problems
Bacteria That Filters Cannot Remove (and What To Do)
Campylobacter and Salmonella both originate in the intestines of humans and animals, and both have long been recognized as waterborne.
These diseases are found in private wells from sewage malfunctions, runoff, and flooding in wells that are shallow, have been bored or dug, or flooded for longer periods of time. There is no filter that has been certified to remove campylobacter or salmonella.
Contact your local state certification officer if your water tests positive for them, and boil your water.
Bacteria can also cause aesthetic issues. Iron-eating bacteria leaves behind waste deposits, causing sludge in your bathroom and kitchen fixtures. It also can react with hydrogen sulfide to cause the rotten egg smell you may be familiar with in your drinking water.
Bacteria is not always a persistent contaminant. It may be the result of a one-time contamination caused by a faulty well cap, new pump installation or surface runoff from heavy rainfall.
The issue can be a seasonal occurrence, as bacteria naturally thrives in warmer environments, all of these issues can be more prevalent in the spring and summer months.
Bacteria in Municipal Systems
While water bacteria are most often an issue affecting those who use well water, it’s not uncommon for municipal supplies to experience occasional issues with bacteria. It can be an issue during periods of heavy rain or runoff, which often impacts reservoirs and existing water treatment infrastructure.
Viruses In Your Water Supply
Viruses, along with bacteria, are near the top of the regulatory list for any public water treatment plan, which is why they rarely reach the tap on a treated municipal supply.
Water Treatment for Viruses
The CDC, WHO and EPA all point to conventional water treatment as what handles viruses in a public supply. That includes:
- Chlorination
- Chloramines
- UV Treatment
Finding Viruses In Unregulated Water Sources Such As Well Water
Other sources where treatment is done by private well owners are more susceptible to contamination. But that doesn’t necessarily mean a virus is lurking in your well. While well water can be a source for bacteria to reside if untreated, there are few instances of anecdotal evidence supporting the presence of viruses in private well water.
“Generally, if a virus gets in a well, it’s an extreme situation, like flooding” said Gary Falkengren, a water treatment specialist with Culligan International for nearly three decades.
Facebook